High Fidelity Color Imaging System WG has released JIIA Standard (JIIA-HFC-001 Ver1.0) of “Measurement method for colour capturing accuracy of industrial cameras”. It stipulates the method of measuring the colorimetric accuracy of cameras in camera imaging and is an evaluation method for selecting and evaluating industrial cameras used in inspection equipment.
If you have any questions, opinions and proposals, please visit our “Contact” Web site and send your message any time.
JIIA Lens Working Group has released “LE-007-2022 (T/CMVU001-2021) CFL, CFL-II and CFL-III Mount Standard and Operational Regulations”.
This document describes the specifications of the Large Format lens mounts of the image sensor corresponding to “Class IV” Image size (31.5 ~ 50 mm diagonal), “Class V” Image size (50 ~ 63 mm diagonal), and “Class VI” Image size (63 ~ 80 mm diagonal).
Also, Lens Working Group has revised the lens mount guidelines from “LER-004-2010 Recommended Mechanical Interfaces Applied for Each Image Size Classification” to “LER-004-2022”.
This revision reflects the latest market trends and newly established lens mount standards.
JIIA Lens Working Group has revised the lens mount standard from “LE-004-2017 TFL Mount and TFL-II Mount Standard and Operational Regulations” to “LE-004-2022” as Systematic Review.
In this revision, the technical specifications are not changed, but we reviewed both Japanese and English descriptions within the document.
JIIA Lens Working Group has revised the lens mount standard from “LE-006-2016NF-J Mount Standard and Operational Regulations” to “LE-006-2021” as Systematic Review.
In this revision, the technical specifications are not changed, but we reviewed both Japanese and English descriptions within the document.
Embedded Vision I/F WG has released the Test Method for SLVS-EC IF Standard Version 2.0”.
This guideline describes the high-speed serial interface evaluation that is required in order to confirm SLVS-EC PHY Layer characteristics.
CoaXPress WG has released latest version of CoaXPress version2.1. The headline change of version 2.0 was the doubling of speed, of both downlink (12.5 Gps per cable) and uplink (so faster triggers) with HD-BNC, MicroBNC and BNC. And now updated by supporting Gen＜I＞Cam GenDC to gain a usability of the interface.
CoaXPress working Group has been released CoaXPress over Fiber Bridge Protocol Guideline.>
This document defines the CoaXPress over Fiber concept based on a physical medium topology and on a series of rules to map the CoaXPress protocol to the interface of the Ethernet physical layer. Based on these rules, a CoaXPress to Ethernet Physical Layer bridge (CXP-PHY bridge) is specified to allow the CoaXPress protocol to be transported over available existing Ethernet components without the need to establish new fiber components for the CoaXPress standard
CoaXPress WG has released “Whitepaper – CoaXPress Connector Guidance Ver.1.0”.
HD BNC / MicroBNC has been added to the CoaXPress2.0 standard as a high-speed transfer connector of 10 Gbps or more. This guidance explains the guidelines for connector selection for development.
If you have any questions, opinions and proposals, please visit our “Contact” Web site and send your message any time.
CoaXPress WG has released “Optical Interface Guideline for CoaXPress Ver.1.0”.
This document intends to provide solution for the needs to apply CXP to environments exposed to extremely long distances or harsh electrical noise environments. It summarizes how to use CoaXPress standard on optical fiber instead of coaxial cable.
If you have any questions, opinions and proposals, please visit our “Contact” Web site and send your message any time.
